Staple gun jam free#
So use the compatible pins to be free from this issue. If you use any wrong staple dimensions, there is a huge possibility that the nails might get stuck. Your staple gun is designed for a specific size of staples. The second reason is that you might be using inappropriate staples. To avoid such an incident, slow down and wait for a bit before firing another staple. So they get jammed on top of each other and disrupt your working flow. And when you do, the pins do not get enough time to get discharged. One of them is that you fire staples too quickly with your staple gun. There can be two reasons why you have this jamming issue. Once you are done removing the stuck staples, just reassemble the staple gun. Use needle-nose pliers to remove them and do it gently as you might cause damage to the staple gun in this process. However, most of the time, the staples get stuck on the discharge area.
So, if you see any of this sort, remove them with needles nose pliers. Sometimes they crash on each other when you staple too frequently. Some pins get stuck in the middle of the magazine as they fail to leave the magazine properly. In your electric staple gun, there are two places where the staples usually get stuck. Now unclip the magazine from the gun case. To remove the magazine of your staple gun, pull the release lever on. And if your tool has a safety lock feature in it, turn that on. Turn off and disconnect the electric staple gun from the power socket before you start working on unjamming. Finally, before you start working with them again, try and test your gun in paper or wood. Then slide the pusher rod in and attach it to the gun case. First, re-insert the magazine and tighten the screw. Once all your stuck staples are out, reassemble the staple gun. Now use the needle nose pliers and pull out the stuck pins. Step 3: Clear Out the Jammed Staples.Īs the magazine and the pusher rod are removed, look at the top of your staple gun from where the staples are usually discharged.
Once the screw is removed, the magazine should slide out of the staple gun without any issue. Use the screwdriver and the pliers to remove that screw. Now there should be a screw at the bottom of the stapler. To take out the magazine, you will need a screwdriver and pliers. So you can just grab the pusher rod and pull it out. Usually, the rod is connected to the gun case by a simple knob. And the spring generates tension to push the staples towards the gun’s chamber. This rod is usually made of metal and has got a spring in it. To unjam your staple gun, you will have to slide out its pusher rod.
Also, turn the safety lock on to avoid any misfire.
Staple gun jam how to#
How to Unjam a Heavy Duty Staple Gunīefore you start unjamming your pneumatic heavy-duty staple gun, be sure to disconnect the air compressor from it. Now that you are done unjamming, reassemble the magazine and put the screw back in its place, and tighten it with the pliers and the screwdriver.
0 kommentar(er)
